Liczymy pasujące modele…
Made a figure from the best game of 2025, I just had red feathers lying around from amazon for the hair but im sure you could use a bunch of different things. The base was made smaller and body was thickened out a bit compared to the…
A table ready board game insert to allow for fast and easy setup of the game. Compatible with the base game and the folowing expansions: Discovery Foundations Crisis Expansion Player’s have pots for their individual components required to…
as a request I modeled Monocos mask From Expedition 33 with the intent for using it as a wall decor but if needed it could be used for cosplay as well. as it stands the model is 775mm tall but the whole model can be scaled down to around…
This is a digital 3D printable model of Sciel’s Scythe, Scielson , from Clair Obscur: Expedition 33 . 📦 Included Files STL (cut for 200mm printer beds) STL (cut for larger printers) Assembled OBJ file (for easy scaling) All cut parts are…
Бульбамех из игры Clair Obscur: Expedition 33 (Bulbomech)
Here’s a little something for fellow Expedition 33 fans. A digital 3D-printable Glowing Monolith Book Nook . Think of it as a tiny slice of the expedition tucked quietly between your books, humming with that familiar yellow shimmer.…
Took the E33 "33" logo and converted it into a simple ornament. Nothing fancy here. The example was printed using Sunlu PLA+ 2.0 Black (because it was the black I had loaded in at the time) and Panchroma PLA Silk Gold. Used the Ironing…
Insert for the original Expeditions organizer. It goes in the same slot as one of the mechs and has slots to hold base.
This is a digital 3D printable model of Verso Sword and Dagger Verleso from Expedition 33. 📦 Included Files STL (cut for 200mm printer beds) STL (cut for larger printers) Assembled OBJ file (for easy scaling) All cut parts are placed on…
Esquie bust to be printed in parts. This design includes the following STLs: -Body -Head -Left/Right ear -Base Printing parameters below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :)…
Bust of Julie from the video game Expedition 33 to be printed in two parts: -Base -Bust Thank you for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :) patreon.com/Artoys3dPrint Busto de Julie de video juego…
This is a direct replacement for the lost or broken pin block on the Our Expedition child carrier. It fits onto the telescopic poles to keep the locking pins engaged and the frame secure. Details Compatibility: Specifically designed for…
Reworking the model for greater detail and printing on a small printer
Hello. For quite some time I liked the cab frame of TRX4 Sport. When I got my K10 I played with idea to recreate something like that. And this is the first outcome. It got mounting positions for stock Trx Defender fueltanks + holders for…
I got the OEX expedition tarp but didn't like that the pole had an open end that would dig into the ground and collect mud so I designed these to fit on the end, if using a configuration that has two poles you will have one pole with a…
I designed this box for a friend who added sleeves to its "The Lost Expedition" cards. To make room for the cards, I had to use a 1mm base for the box. It bends a little but it's solid enough for the task. I also made an untested version…
I needed a additional container for Terraforming mars ares expedition so i designed this :)
A commemorative coin that can be used as a giveaway in your classroom celebrating the achievements of the crew of Expedition 72 of the International Space Station! This model is based on the Mission Patch for Expedition 72 crew, designed…
Indoor/Outdoor thermometer holster for a Ford Expedition (2020), should work for any Ford model with a similar coin holder (F150, F250, Transit, Expedition, etc.) This is specifically for the AcuRite Digital Thermometer (amazon link,…
I didn't really need a coin tray in my car, so I designed this plate to attach a phone mount. I used this adhesive magnetic phone mount. AMAZON LINK The coin tray will easily pop out using pliers or plastic tool. I included a hole in the…
Print face down. Add color changes at your preference. Avoid supports on the logo face if possible
You can pick up or place the entire stack of coins at once . The default version includes a handle , which makes it much easier to move the holder around. However, it slightly impairs access to coins, so if you prefer having more space in…
Ford Expedition Overhead Console Hinge This is a replacement hinge for the sunglasses holder or conversation mirror in the overhead console of a 2007–2014 Ford Expedition . Print Settings: Supports: Tree Infill: Any (100% preferred)…
A table ready board game insert to allow for fast and easy setup of the game. Compatible with the base game and the folowing expansions: Discovery Foundations Crisis Expansion Player’s have pots for their individual components required to…
Expedition display (cardholder) for board game Frostpunk. There are 2 versions: - display for 1 expedition - display for 3 expeditions. It is for unsleeved cards. I suppose that display can be slightly resize in slicer to accept sleeved…
Print 100% infill with brim. 2x M2x10 2x M2 nut I recommend lightly gluing the screws so that they don't loosen during the ride and to prevent them from getting lost. Doporučuji šroubky lehce přilepit, aby se během jízdy nemohly uvolnit a…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Gustave Prosthesis Wearable Cosplay Arm from Clair Obscur: Expedition…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Maelle Broosh with pin from Clair Obscur: Expedition 33. The supports…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Chainsaw 1:10 and 1:12 for the RC car Expedition. The chainsaw is completely authentic and must not be missing in the equipment of any RC jeep Expedition. It…
Expedition 33 Esquie character pack, this model contains a wearable real size mask and a hanging mask with a specific cavity for hanging. This model has these STLs: USABLE Mask: -Mask with cavities for viewing and hanging on the face.…
A quick remix of othe Ford Expedition key fob faceplate to include hole for the alarm button. Use support for keyring
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Esquie Mask from Clair Obscur: Expedition 33. Some parts need to be…
Hello, I have for you a Trailer, carriage for RC car expedition terrain jeep 1:10, 1:12. The trailer is made in scale 1:10 or 1:12, but you can use it for anything. It has 2 axles for better stability. The model needs to be disassembled…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Clair Obscur Expedition 33 Collectors editor fan art monolith to be printed in parts. This model has these STLs: -Top Monolith -Base Monolith -Character This monolith is 25cm high (scalable model). The color images are only a…
Curator Bust from the video game Expedition 33 to be printed in two parts: -Base -Bust The colour images are a representation of how it could be painted. Thank you for stopping by :)…
🔒 Personal Use Only This model is free for personal use only and may not be sold, shared, or remixed in any form. 🛒 Want to sell physical prints of this model? Join the Commercial License Tier on Patreon.com/Foorbits to get legal rights…
Hello, I have for you a Military crate for RC car expedition 1:10, 1:12 I used PLA/PETG Basic as the material No need to use support If you are interested in my work, the links are here: https://www.instagram.com/ainon3dprint/…
Hello, I have for you a Minimalist Beer Crate for RC car expedition 1:10, 1:12. The part is a crate for 20 and 12 beers, including beers. I used PLA/PETG Basic as the material No need to use supports If you are interested in my work, the…
Hello, I have Traction pads for RC car Expedition 1:10, 1:12 RMT T98 Land Rover Defender. They are 220x30mm. I used PLA/PETG Basic as material You need to use supports If you are interested in my work, the links are here:…
as a request I modeled Monocos mask From Expedition 33 with the intent for using it as a wall decor but if needed it could be used for cosplay as well. as it stands the model is 775mm tall but the whole model can be scaled down to around…
Badge for arm of Clair Obscur : Expedition 33 Printed all black then painted gold, the holes are perfect for any kind of string. I scaled it up to 10cm vertical but you can adapt it to your arm and as you wish.
Description: (Introduction - The Problem) Is the gear shifter in your Ford F-150, Expedition, or Lincoln Navigator feeling loose, sloppy, or missing that satisfying "click" when you move it between gears (Park, Reverse, Drive, etc.)? Did…
Verso's Verleso sword & Dagger from Expedition 33! This listing is for the digital .STL files to download and print at home on your own 3D printer! The sword measures approx. 105cm in length, and the dagger approx. 50cm. Both have…
Maelle's Maellum rapier & her brooch from Expedition 33! This listing is for the digital .STL files to download and print at home on your own 3D printer! The sword measures approx. 110cm in length, and the brooch approx. 10cm. The rapier…
Necessity is the mother of invention. I needed a good way to help me not only guy up my mast but also make it slim so I can pack it in its bag the mast came in. I made a lip on the top edge so the collar is locked at the end of the tube.…
Half Bust of The Paintress from Expedition 33 to be printed in parts. Size 25cm high (Scalable model). This design has these STLs: -Hair -Torso & Head -Right Arm -Left Arm -Palette -Base The color images are a representation of how it…
Alice life-size mask. This model is available in two versions: a base version, clean without details to paint on top and the other version with wear details and the carved design. Thanks for stopping by :)…
Clair Obscur Expedition 33 Monolith Dice Tower. This original design was adapted for use in the board games of your choice, the maximum dice size is 25mm (ideal). This “Dice Tower” design has a height of approximately 35cm high. The base…
Statuette of Esquie Buddha of Expedition 33 Clair Obscur of 25 cm to be printed by parts. This model has these STLs: -Body Buddha -Head -Right and left ear. Please look at the images to see the joints. Thanks for stopping by! :) Link to…
This extension tube goes under the front seat of an F-150, F-250, F-350, or Ford Expedition. This extends the vent further to the rear seat for better airflow.
Pack with all the busts of Expedition 33 Clair Obscur: -Lune -Sophie -Curator -The Paintress -Sciel -Gustave -Renoir -Maelle -Base Thanks for stopping by :) Link to Patreon :) patreon.com/Artoys3dPrint Pack con todos los bustos de…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Alicia Mask from Clair Obscur Expedition 33. The supports required. Some…
Customized version of https://www.thingiverse.com/thing:1039106 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1039106 I just used a steel ruler and a hairdryer to soften the print so that I can get good…
Customized version of https://www.thingiverse.com/thing:1039106 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1039106 I use the steel ruler and a hairdryer to soften the print so that I can make good…
Customized version of https://www.thingiverse.com/thing:1039106 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1039106 I just use the hairdryer and a steel ruler to bend the tabs so that makes a good…
Clair Obscur Expedition 33 Mime Mask to be printed in one piece. The scale is approximate, please check the measurements in slicer and scale to taste and proportions you want. The mask has the corresponding holes to attach elastic for…
Mask of Renoir from the video game Expedition 33 x 2 pack The mask has the corresponding holes to attach elastic for fastening. -Mask without holes, precisely so that the user can make them at will. -Mas with holes Thank you for stopping…
Mask of The Paintress from the video game Expedition 33 x 2 pack The mask has the corresponding holes to attach elastic for fastening. -Mask without holes, precisely so that the user can make them at will. -Mas with holes Thank you for…
Base support for antenna mast to prevent slipping when guy wires are used. It also has a groove for guiding the antenna wire inside the mast. Filament used is PETG. Used 4 perimeters, 5 solid layers for top and bottom, 15% Gyroid infill.…
Mask of Gustave de Clair Obscur Expedition 33 to be printed in one piece. Adapt the scale to suit the user, see below for printing details. Thanks for stopping by :) Link to Patreon :) patreon.com/Artoys3dPrint Mascara de Gustave de Clair…
I wanted a mount for a trailer brake controller that I could remove when not in use. This fits a 2022 Ford Expedition and a Tekonsha BRAKE-EVN controller. It may fit other years/models or other brake controllers, but I do not know for…
This is a digital 3D printable model of Maelle’s Rapier Maellum from the Clair Obscur: Expedition 33 videogame. ✨ Forged with game-level accuracy, in both a realistic textured version for added detail and a smooth version. The download…
Clea's Hair needs to be sculpted from air dry clay, foam clay, or thermoplastic beads. I do not have the artistic skills to do this in Fusion360. “Clea and Francois are best friends, she would never leave him.” - Esquie The better rock!
A fabric paint stamp and crest badge for those looking to upgrade their cosplays! Sciel and Gustave have this printed on their jackets. Verso's is a physical badge and has space for a flat-back pin to be glued.
I recently played Clair Obscur: Expedition 33 and loved it. Decided to make Gustave's Lumina Converter as a lamp that uses PN532 to sense Nevrons with RFID tags to toggle different lighting effects. So it's just like in the game - the…
This is already mirrored. Print it, glue on the stamp handle, and stamp using gold fabric paint onto a black rectangle (5cmx8cm).
Record player from Clair Obscur: Expedition 33 as a Bluetooth speaker. The speakers are housed in the stool and both the stool and record player can be separated so better speakers can be connected instead. Parts: PAM8403 DIY Wireless…
Add a round tip to assist in holding the bag better.
A while back I had an idea to make an actual paintress who rises up and "paints" a new number on her monolith. I was finally able to put it together. It uses a servo and a stepper motor to turn/lift the paintress. And a small OLED screen…
The Power Pole Expedition 7 with Stauff clamp is easy to print using flexible filament such as Extrudr Flex Hard. I printed it with a 0.6 mm nozzle and standard settings.
This part replaces just the organizer in the base game that holds the workers and coins. It's the same overall dimensions so it fits into the same spot in the box with space for the mech boards above. I designed it for the metal coins to…
Project: firstoverlandexp.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x135.59mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is an extensive remix/modification of sl4ppy's Terraforming Mars playerboard overlay. Size has been increased by a few mm to fit the larger playerboards that are apparently shipping from Target now (Version I have). Also adjusted…
Accessories for the VW T3 camper model. (Universal trailer model for future projects) used screws: M3x20mm (12x) red M3x6mm (3x) blue Keep the orientation of the parts as original STL file. Printer setup: Nozzle diameter 0,4 10% infill…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Paintress Monolith from Clair Obscur: Expedition 33. The supports…
This is a digital 3D printable model of Sciel’s Scythe, Scielson , from Clair Obscur: Expedition 33 . 📦 Included Files STL (cut for 200mm printer beds) STL (cut for larger printers) Assembled OBJ file (for easy scaling) All cut parts are…
This is a digital 3D-printable model of Sciel’s scythe, Charnon , from Clair Obscur: Expedition 33 . The model includes two handle versions - one with fabric wrapping and one without. It’s intended for a 0.3-inch diameter steel rod. 📦…
Бульбамех из игры Clair Obscur: Expedition 33 (Bulbomech)
This is a digital STL file – print-ready and high quality. The **Renoir Cane** from *Clair Obscur: Expedition 33* — a life-size, hyper-detailed replica of the signature weapon. Every micro-engraving, curve, and ornamental segment has been…
This is a digital STL file – print-ready and high quality. The **Maellum Rapier** from *Clair Obscur: Expedition 33* — a photorealistic, ultra-detailed life-size replica of Maelle’s iconic weapon. Every ornament and structural line was…
This is a digital STL file – print-ready and high quality. The **Lune Lighterim** from *Clair Obscur: Expedition 33* — a life-size replica of Lune’s iconic throwing weapon, shaped like a stylized shuriken. Designed as a clean one-mesh…
The planet fits tight in the stand upcale it 2-3% to make it more looes.
This is a digital STL file - print-ready and high quality. The **Gustave Pistol** from *Clair Obscur: Expedition 33* - a highly detailed, photorealistic life-size replica of Gustave’s weapon. Designed for precise printing and effortless…
OVERVIEW This is a nearly fully 3D-printable 1:16 RC car built for real driving and exploration (or display, of course). It’s a weekend-scale, beginner-friendly project . No soldering or cutting. You print the parts (~70h), assemble them,…
Made from PLA. Dimensions 79,6x47,4x30 Print instructions Category: R/C Vehicles Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: Yes Resolution: 0,2 Infill: 20 Filament: Prusament PLA Silver
Motivation I wanted a nice way to display phase cards in Ares Expedition, so put together a design to show them in a prominent way. The cards are also easy to flip over on the holder, as they protrude slightly over the top to make them…
Here’s a little something for fellow Expedition 33 fans. A digital 3D-printable Glowing Monolith Book Nook . Think of it as a tiny slice of the expedition tucked quietly between your books, humming with that familiar yellow shimmer.…
I designed this phone stand to be elegant and use minimal filament. It features space for a charging cable to be used without any issues, as well as room underneath to place something like a pair of in ear headphones.
Alicia's mask (latest version is Rev4), I revised it a bit to bring the cheeks in and modified the lips a little. Since then, extra details have been added (Big thanks to Zlatri for sending me a nice reference shot of the masks side) . It…
Took the E33 "33" logo and converted it into a simple ornament. Nothing fancy here. The example was printed using Sunlu PLA+ 2.0 Black (because it was the black I had loaded in at the time) and Panchroma PLA Silk Gold. Used the Ironing…
Salut Terraformeurs, Alors, j'ai voulu imprimer des overlays pour mes plateaux joueurs d'Ares Expedition. J'ai tenté d'imprimer ceux de PandaruExpress qui me semblaient tout à fait adapté à mes besoins. Mais l'impression était…
This is a gridfinity compatible center console organizer for the following Ford trucks and SUVs: 2015-2020 F-150 2017+ Super Duty (F-250 - F-550) 2018+ Expedition This model uses the standard gridfinity pattern to fit in the bottom of the…
A prop of Gustave's mechanical arm. It is assembled with superglue and has lines and grooves that facilitate easy painting, I consider myself a very bad prop painter, but with some clear coat, acrylic markers and some patina grease ( you…
![VERSO Verleso Sword & Dagger STL FILES [Expedition 33] | Cosplay Prop | 3D Print Files | Instant Download](https://media.printables.com/media/prints/4b5278a4-4b6b-48e8-a6cf-0db5357b208b/images/9886847_4f6c5e67-6d30-475b-9714-df402852aed9_c9550236-e369-437c-a919-5012c09366bf/listing-graphics_7.jpg)
![MAELLE Maellum Sword & Brooch STL FILES [Expedition 33] | Cosplay Prop | 3D Print Files](https://media.printables.com/media/prints/01756a38-090a-47e3-8b75-edff887f6d01/images/9886860_59303807-9824-47d3-b07f-0fc62f2ed509_fe1d3802-26df-482a-8968-73b9aab94435/listing-graphics_7.jpg)
