Dirt Remover for Lightning / USB Type C / Mini-USB
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.07 – €0.08 net (excluding VAT)
For file: usb-type-c-port-smd-type_01mm_petg_mk3s_2m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 1.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easy to print, ready for cleaning in 5 minutes. easy, safe*, reliabe and sustainable. Use PLA or PETG.
- Rating
- 4.917 / 5
- Likes
- 130
- Downloads
- 1,558
- Makes
- 18
- Views
- 5,570
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Simple Idea but big help!
SINCE 2021 → I'm the original Inventor of this idea!
Easy to print, ready for cleaning in 5 minutes. easy, safe*, reliabe and sustainable. Use PLA or PETG. Infill doesn't matter. Layer high 0.1.
*Don't push to hard! Do use gently, if you push to hard the top of the tool bends. No guarantee for damage to the device! Use at your own risk.
Print Settings
Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.1
Filament brand:
None
Filament material:
PETG or PLA
Notes:
Any material does the trick.