F-35 Lightning II Kit Card
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.78 – €0.95 net (excluding VAT)
For file: F-35B Lightning II Sprue_0.2mm_PLA_MINI_57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.86 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 57 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A thunderstorm approaches... Kit card of Lockheed Martin F-35 Lightning II. Included are both A, B, and C variants.
- Rating
- 4.667 / 5
- Likes
- 155
- Downloads
- 637
- Makes
- 7
- Views
- 3,536
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
F-35 Lightning II is the United States' newest fighter, developed and produced by Lockheed Martin. The F-35 is a 5th Gen multirole stealth fighter, resulting from the Joint Strike Fighter program. The JSF program aimed at providing an airframe that could fulfill the roles of the F-16, A-10, F/A-18, and AV-8B. Instead of one aircraft, three different variants share a similar airframe. The F-35A is the conventional takeoff and landing (CTOL) with an internal GAU-22 gatling cannon entering service in the USAF on August 2, 2016. The F-35B is the Short Takeoff and Vertical Landing (STOVL) variant. Lacking an internal gun, it entered service in the USMC on July 31, 2015. The F-35C is the carrier-based variant, with a stronger arrester hook, more robust landing gear, larger wings, and the highest fuel capacity of the three. It entered service in the USN on February 28, 2019. The F-35 has seen major export to many NATO countries, such as Australia, Belgium, Canada, Germany, and Israel.
This kit card was suggested by justin m. If you don't see an aircraft or helicopter that you like, feel free to suggest or commission it!
For best results print at 0.20mm layer height and %100 infill. Anything else and the kit card may not fit together correctly. Both Sprue and Sprue-less models included along with the individual parts. This kit card requires no glue. If you are printing with the individual parts you will want:
Wing x1
Fuselage/Landing Gear x1
Tail/Landing Gear L/R x1
If printing the F-35C with wings folded your will want:
Wing Folded x1
Fuselage/Landing Gear x1
Tail/Landing Gear L/R x1
Wing Spar x2
Wing Tip x2