Resistance Tube/Theraband Dumbbell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dumbbell meant to be used with a Theraband/resistance tube that you can buy like this:…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 646
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
This is a dumbbell meant to be used with a Theraband/resistance tube that you can buy like this:
https://www.amazon.com/Cando-10-5380-Low-Powder-Exercise-Resistance/dp/B001RQ5QI2/ref=sr\_1\_3?dchild=1&keywords=theraband+tube&qid=1592967536&sr=8-3
You need to print both parts and two M4-12 (or similar) screws to mate the two together.
There are two cuts inside so that you can tie and end of the tube and it should keep in place inside the dumbbell.
Enjoy!
Print instructions
Category: Sport & Outdoors Summary
This is a dumbbell meant to be used with a Theraband/resistance tube that you can buy like this:
https://www.amazon.com/Cando-10-5380-Low-Powder-Exercise-Resistance/dp/B001RQ5QI2/ref=sr\_1\_3?dchild=1&keywords=theraband+tube&qid=1592967536&sr=8-3
You need to print both parts and two M4-12 (or similar) screws to mate the two together.
There are two cuts inside so that you can tie and end of the tube and it should keep in place inside the dumbbell.
Enjoy!
How I Designed This
A lot of iterations! The picture shows the 3d prints that I used to iterate the model.