Resistance Tube/Theraband Dumbbell
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a dumbbell meant to be used with a Theraband/resistance tube that you can buy like this:…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 646
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution
This is a dumbbell meant to be used with a Theraband/resistance tube that you can buy like this:
https://www.amazon.com/Cando-10-5380-Low-Powder-Exercise-Resistance/dp/B001RQ5QI2/ref=sr\_1\_3?dchild=1&keywords=theraband+tube&qid=1592967536&sr=8-3
You need to print both parts and two M4-12 (or similar) screws to mate the two together.
There are two cuts inside so that you can tie and end of the tube and it should keep in place inside the dumbbell.
Enjoy!
Print instructions
Category: Sport & Outdoors Summary
This is a dumbbell meant to be used with a Theraband/resistance tube that you can buy like this:
https://www.amazon.com/Cando-10-5380-Low-Powder-Exercise-Resistance/dp/B001RQ5QI2/ref=sr\_1\_3?dchild=1&keywords=theraband+tube&qid=1592967536&sr=8-3
You need to print both parts and two M4-12 (or similar) screws to mate the two together.
There are two cuts inside so that you can tie and end of the tube and it should keep in place inside the dumbbell.
Enjoy!
How I Designed This
A lot of iterations! The picture shows the 3d prints that I used to iterate the model.