1 / 1
Belt Idler for Original Ender 3 Y-Belt — zdjęcie 1

Belt Idler for Original Ender 3 Y-Belt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prevents the Y-belt of the Ender 3 from rubbing on the aluminium extrusion and raises the belt a bit to make it parallel

Ocena
0 / 5
Polubienia
13
Pobrania
67
Wydruki
0
Wyświetlenia
441
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

One day I noticed the Y-belt on my Ender 3 not beeing parallel with the Y-axis extrusion and sometimes rubbing. After some research a came up with this solution.

just push in the original f688 bearings and you are done!

Tagi