Tealight Mug Warmer (V2 Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Really liked this mug warmer by JezeusCristo but felt it could use a little stablisation and found the feet a bit too…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Really liked this mug warmer by JezeusCristo but felt it could use a little stablisation and found the feet a bit too sharp.
I've added a ring to the top for stabilisation and weight distribution, and replace the feet with something a little rounder at the point. I also thickened and flattened the feet as I've found this helps with removing supports.
Unfortunately this does add a lot of extra material (and printing time) to support the ring, but I'm happy with how it came out and it supports my favourite mug (95mm/3.75" diameter) wonderfully.
I would advise printing in ABS or other high-temperature material to reduce the risk of deformation near a heat source.
Print Settings
Printer Brand:
Anycubic
Printer:
Semi-closed 4Max
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Filament: Flashforge ABS Pro Black
Category: Household