Tealight Mug Warmer (V2 Remix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Really liked this mug warmer by JezeusCristo but felt it could use a little stablisation and found the feet a bit too…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Really liked this mug warmer by JezeusCristo but felt it could use a little stablisation and found the feet a bit too sharp.
I've added a ring to the top for stabilisation and weight distribution, and replace the feet with something a little rounder at the point. I also thickened and flattened the feet as I've found this helps with removing supports.
Unfortunately this does add a lot of extra material (and printing time) to support the ring, but I'm happy with how it came out and it supports my favourite mug (95mm/3.75" diameter) wonderfully.
I would advise printing in ABS or other high-temperature material to reduce the risk of deformation near a heat source.
Print Settings
Printer Brand:
Anycubic
Printer:
Semi-closed 4Max
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Filament: Flashforge ABS Pro Black
Category: Household