PrusaBox Enclosure - Adapter Plate to Center Modular Control Panel with PWM Fan Control.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated to work with Colin Hill's PWM Fan Control add on for the Printer-Box Modular Control Panel. New PI side Tweaked
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I updated this to work with a 5inch monitor and Colin Hill's “Prusa Box PWM Temperature & Fan Proportional Speed Control For Modular Front 3D Printer Enclosure”. Before you could not get to all of the screws (Quick_top_remove mod) to release the top of the printer case. Every thing wilsondg said in the original still goes. I added one more nut for the center screw of the case to mount too. Also filled in middle so bracket has a better place to sit.
Ver 2.2 PI side
Tweaked PI side added hole for center support and opened up a little for access to USB ports.
Added center bracket with top hole to work with new adapter plates. Use the top hole to mount to mod panel adapter plate not the center one.