Case Duet 2 Wifi PanelDue 4.3-inch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for Duet 2 Wifi PanelDue 4.3 inch
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a case for a Duet 2 Wifi PanelDue 4.3 inch.
The switch on the top left (19mm) is a 230V switch to turn on the printer. In order to shield the user from the 230V line, the switch is additionally protected in the housing.
The switch on the bottom right (16mm) is for switching the printer's lighting on and off.
I used the following switches:
The screw connections for the display and the back are intended for an M3 screw. M3 press-in nuts go into the holes provided for this purpose.
The display bracket "left" must be printed twice
I printed the part with the front face on the print bed
Support: Yes