Bambu Lab X1 / X1C button protection

This TPU plate will protect the buttons on the X1 / X1C from accidental activation or heavy impact…

I've pressed the buttons a few too many times with my arm or hand without looking... So, I find it very useful… specially, while printing…

This TPU plate does not interfere with the top glass, it does not interfere with the side panels or with the front of the unit (should you need to mod. it or change parts…)

It is ergonomic and user friendly with a finger rest channel in the middle…

NOTE:
> Print in TPU 95A 
> Use standard OEM Bambu Lab TPU 95A settings in the slicer.
> Infill 25% , Honeycomb.
> I used the OEM cold plate with a coat of Magigoo…
> To attach, use a piece of 3M / Scotch heavy duty double sided 410M tape in the middle of the TPU plate. You could also use standard VHB, foam, paper base, fabric base (However, 410M is super thin and very grippy, yet easy to remove if needed) or use a dab of clear gorilla glue if you have no tape around.

> Why TPU? , well, truth be told, you can print this in any filament you may want… However, TPU gives you a “soft-medium” bumper like consistency which is more "skin friendly" 

 Have fun :) Cheers!
 

Click here for other 3D items for Bambu Lab X1 / X1 Carbon / P1P…