Hamilton Music Stand Central Tension Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for Hamilton Portable Music Stand (KB90)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement part for the Hamilton KB90 music stand. This is the part that applies tension to the telescoping tubes.
The bolt of the original music stand stripped. I replaced it with the knob (at https://www.thingiverse.com/thing:2058412) and a M6 x 50mm hex cap bolt.
When the replacement stripped (potentially due to a damaged nut) and got stuck, I decided to replace the whole assembly by creating this model.
The model was designed for M6-1.0 hex nuts instead of the original square nuts. The bottom tube is secured using a M6-1.0 x 20mm socket head cap screw, use the original if possible. The top telescoping tube is secured using the above-linked knob with a M6-10.x 50mm hex cap bolt, or your own preference.
Needs supports. I printed with 30% infill. Print in a durable material that can take a bit of tension/compression, like PETG.