Hamilton Music Stand Central Tension Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement part for Hamilton Portable Music Stand (KB90)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 34
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
This is a replacement part for the Hamilton KB90 music stand. This is the part that applies tension to the telescoping tubes.
The bolt of the original music stand stripped. I replaced it with the knob (at https://www.thingiverse.com/thing:2058412) and a M6 x 50mm hex cap bolt.
When the replacement stripped (potentially due to a damaged nut) and got stuck, I decided to replace the whole assembly by creating this model.
The model was designed for M6-1.0 hex nuts instead of the original square nuts. The bottom tube is secured using a M6-1.0 x 20mm socket head cap screw, use the original if possible. The top telescoping tube is secured using the above-linked knob with a M6-10.x 50mm hex cap bolt, or your own preference.
Needs supports. I printed with 30% infill. Print in a durable material that can take a bit of tension/compression, like PETG.