Guide rail adapter for Ryobi R18MMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn your Ryobi R18MMS to a tracksaw with this guide rail adapter. Fits rails from Makita, Festool and Bosch.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 1491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Since I have booth a Makita plungesaw with rails and a Ryobi R18MMS, I wanted to make a solution where I could use the Ryobi-saw with the rails. So i came up with this.
There's a slot on the adapter thats fit with the little edge on the sawbed. To get it secured better you can install a M6 square nut in the slot of the side of the guide. That way you can mount the originally guide to the saw, up side down and into the adapter where you lock it of with a M6 setscrew thru the square nut.
You can get both the square nut and the setscrew from Aliexpress.
I printed mine with PETG, 0.4 nozzle, 20% infill and with standard settings on my AnkerMake M5