TRAXXAS REVO 3.3 Conversion kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
conversion kit for the revo 3.3 & revo 2.5 found out it also works on the slayer pro.3.3
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 239
- Wydruki
- 0
- Wyświetlenia
- 2185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
conversion kit for the revo 3.3 & revo 2.5 found out it also works on the slayer pro.3.3
you will have to arrange the parts on your printer for best printing but al;l parts are printed with 100% infill
hardware needed are standard revo screws but the use of nylock nuts are implemented to keep everything secure
i have 2 different configurations dependent on if you want to use the newer e-revo gearbox or the stock
other requisites are locking the original gearbox into 2nd gear if you dont want the 2speed gearbox
you will need a mod1 toothed gear multipacks are available on ebay/amazon
you ofcourse will need a motor and esc
recomended to attain a clutch eliminator kit this can also be found online
see photos for clarification on where parts should go
any questions feel free to ask in the comments