Furniture riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are some furniture riser cups I specifically designed for an IKEA VIMLE sofa. The sofa was marginally too low…
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 284
- Wydruki
- 3
- Wyświetlenia
- 1797
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
These are some furniture riser cups I specifically designed for an IKEA VIMLE sofa. The sofa was marginally too low for my robot vacuum cleaner to fit under, so I designed and printed a 15mm set of risers. The pads were designed to work on furniture feet with diameters up to 44mm.
It's recommended to attach 40mm round felt pads at the bottom. Make sure to account for the thickness of your felt pads. e.g if you have 5mm felt pad and you need 20mm extra height, pick the 15mm STL.
To support heavy furniture the design includes hexagonal cavities, which gives substantial tolerance to compression, without printing the parts solid.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Infill:
70
Filament:
ERYONE PETG
Notes:
Set the number of perimeters to at least 4.
Depending on your layer height, the top and bottom layers should be enough to ensure no infill between the hexagonal cavities and the top/down surface. I used 0.3mm layer height with 4 top layers and 3 bottom.Category: Household