Nouvolo Steck - Boot USB type-A mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
USB type-A port front-I/O mod for the Nouvolo Steck small form factor PC case. I've included two versions: Steck-…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
USB type-A port front-I/O mod for the Nouvolo Steck small form factor PC case.
I've included two versions:
- Steck-Boot_USB-type-A_v6: Allows for pass-through of USB ports
- Steck-Boot_USB-type-A_v6 (smaller USB hole tolerances): Keeps the USB port flush with the side. This is recommended for most use cases and especially if you plan on moving your PC often.
Both are recommended to print with the "front side" on build-plate to avoid supports
USB Ports
Check out your motherboard specs to determine what version of USB it supports.
I bought this USB 3.0 20-pin connector because the flat cables would be easier to route: https://www.amazon.com/dp/B010NBLRHK
With some minor modifications, you could add a type-C port: https://www.amazon.com/dp/B07ZNPXLSG
Want to modify the CAD files for mic/headphones? More USB ports? FireWire? Edit the base file and please share your changes! https://www.thingiverse.com/thing:4169015
Category: Computer