1 / 6
Prusa steel sheet holder for Skadis — zdjęcie 1
1 / 6

Prusa steel sheet holder for Skadis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Show off your steel sheets on your Skadis board

Ocena
5 / 5
Polubienia
22
Pobrania
79
Wydruki
6
Wyświetlenia
668
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I have an IKEA Skadis board right next to my printer. I'm currently going through it and organizing it into half functional tools that I use around my printer often and the other half being different prints I have made in the past.

I wanted to make a holder where I could put my print surface not currently in use. I also won a Prusa 10th anniversary smooth sheet. I decided that I wanted to have that be hanging up since I am never going to use it. I choose to hide the plate I am not currently using behind the 10th anniversary plate that I will be showcasing on the board. This way, the extra sheet could be hidden while still being readily available.

The reason I went ahead and made my own model for this rather than using one of the models on here is twofold. First, most of the models I've seen have the plate sitting sideways. That would do no good for me because I wanted the text to be legible without tilting your head. Secondly, because aesthetics would be important to me because I was using this holder to showcase the anniversary steel sheet, I did not want to cover up any of the text on the bottom. Most of the models here are purely functional, so they cover up the text on the bottom.

To attach the holders, I used Will's Skadis T-Clip System. He has created a very easy-to-use system. I modified this Example Attached Part in FreeCad to create the main shape. Then in Blender, I beveled the edges then mirrored the part to make the holder for the other side. I also modified the t-clip for the painted board to not have the protruding part of the clip. I wanted the holders to have a lower profile. I also made a small little tool to help me turn the t-clips.

 

Files included

  • PrusaSteelSheetHolder_allFiles_0.3mm_PLA_MK3S_2h53m.gcode
  • PrusaSteelSheetHolder_allFiles.3mf
  • PrusaSteelSheetHolder_left.stl
  • PrusaSteelSheetHolder_right.stl
  • T-ClipTool.stl
  • TClipsModified.stl
  • PrusaSteelSheetHolder.FCStd
  • PrusaSteelSheetHolder.blend

 

  • Please note that all the gcode files include  ‘X25 Y100 Z200’ as coordinates to rise to after printing.
  • Designed by Eva Lilja Lowenhielm, Inter Ikea Systems BV holds the patent to the Skadis board. All rights to this model belongs to them.

Tagi