Travel Mancala Game Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thought it would be fun to design a single print game. Took it on as a design challenge.
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 951
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Had a fun time with this. I wanted to challenge my Fusion 360 skills. Mancala seemed like a great game to try. Enjoy
Update 1/1/2023
After playing with version 4, I noted that the magnets could be stronger. Made another version with 3 sets of magnets to make sure it will not open by accident.
Goals of the print:
- Print all at the same time
- Have Magnetic closure
- Multiple articulating parts
Needs for the print:
- A spool of PLA (multiple colors if you want)
- Magnets 4mmx10mm (2 from Amazon will work)
- Follow the directions carefully
- Unpopped corn
Directions for the print.
Stop the print at appropriate slice to add the magnets. The 10mm layer is the layer you would want to spot the print. The magnet might be tight when you place it, which is a good thing so the magnet will not lift out and stick to a part of your printer.
MUST make sure that the magnets will attract each other when the game is closed. Test the magnets first and mark which sides will have to be pointed up so that they don't repel each other.