1 / 2
Minisforum GK50 New case with 92mm Fan support — zdjęcie 1
1 / 2

Minisforum GK50 New case with 92mm Fan support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

New case with 92mm Fan support

Ocena
0 / 5
Polubienia
2
Pobrania
29
Wydruki
0
Wyświetlenia
581
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to add a fan to my Minisforum GK50 because i use it for my printer and it runs 24/7 most of the time.

Its nothing special and i am no 3d Modeling Expert but it seems to work quiet well. The “mesh” isnt really airflow optimized but it works.

The files are easy to print without any supports. I printed mine in ABS but i think PETG should also be fine.

I used M3 heated inserts for the top lid with countersunk screws and the fan is also attached with countersunk screws and a nut.

The mainboard is screwed in with the original screws. 

 

The new case has no 2.5" drive mount.

Tagi