Go Kart gas pedal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts Needed --------------- 4-8mm bolts 1-30mm 2-36mm 1-43mm 4- 8mm locking collars ---------------
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 1273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this for my go kart. The pedal is 1.5" W x 6.25" L . This has all the parts in the STL file I will be making the other pedals later for brake and clutch. you might have to scale it just a little in the slicing software. I slightly undersized the bolt holes which are 8mm bolts in diameter. scale to 102%. Some parts may have to be filed or sanded to fit together. I printed with PLA first. Its meant to be printed in PETG or Nylon for strength and heat resistance. need to have supports. the included picture is for PLA , may need to teak for PETG. Print the main bracket on its side for the best strength. Printed at .28 layer height