Go Kart gas pedal
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts Needed --------------- 4-8mm bolts 1-30mm 2-36mm 1-43mm 4- 8mm locking collars ---------------
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 146
- Makes
- 0
- Views
- 1,275
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I made this for my go kart. The pedal is 1.5" W x 6.25" L . This has all the parts in the STL file I will be making the other pedals later for brake and clutch. you might have to scale it just a little in the slicing software. I slightly undersized the bolt holes which are 8mm bolts in diameter. scale to 102%. Some parts may have to be filed or sanded to fit together. I printed with PLA first. Its meant to be printed in PETG or Nylon for strength and heat resistance. need to have supports. the included picture is for PLA , may need to teak for PETG. Print the main bracket on its side for the best strength. Printed at .28 layer height