Counting matching models…
I bought the Roadless Gear thumb throttle kit to add onto my 1988 Suzuki Samurai, but wasn't thrilled with the included hardware to mount the throttle to the shifter - felt too loose and didn't clasp correctly (probably my error). I…
Ergonomic grip clamp for most motorcycles, can be clamped into place with a ziptie. Printed in PETG. no supports. 50%-80% infill
This design adjusts the angle of the throttle quadrant 30 degrees to a more comfortable flatter angle. I designed it to match the angle of the throttles seen on airliners and other aircraft. For easier storage it is printed in multiple…
I couldn't find the Throttle Lever for a lost CH Products Flight Yoke, just the Mixture and Prop Levers were available. I printed it in Polymaker ASA normal settings without supports.
Got this Honda CRF125FB for my kid and wanted to limit power until he's used to clutch, gears and power this bike offers. As this is newer model with fuel injection, designed this small part which can be easily attached to throttle body…
A set of 3D printed throttle handles for the Honeycomb Bravo Throttle Quadrant. The original Honeycomb handles are relatively small, and this replacement set has a much more realistic scale. Make those Microsoft Flight Simulator, X-Plane…
1) print with 100% infill ! 2) non-grip version: ebike-s73-throttle-v3 3) grip friendly version: super-thin model: ebike-s73-throttle-v5_super_thin
this is a model for the button on a happyrun i use it for my g50 it makes it so u can change it from the ugly green color i just used super glue to put it on
This throttle lever is designed to replicate the look and feel of the Tecnam P-Mentor power lever, perfectly adapted for the Honeycomb Bravo Throttle Quadrant . It provides a more realistic flight control experience , enhancing ergonomics…
The longer selector knob makes it easy to quickly switch positions with a touch of your pinky. Print with support. Print Settings Supports: Yes Category: Hobby
A End Piece for a trottlecable of the BMW M50 Throttlecable. Fits Perfect for Schassis. (made it for my S14) Should fit in various nissans or custom builds. 7mm bowden. 15mm Hole. No supports needed.
This is remix of the original. Everything about it and instructions can be found here: https://www.printables.com/model/256464-densha-de-go-plug-play-brake-throttle-upgrade I had to remodel the parts to make them more of a snug fit for my…
I broke my yaw/rudder pedal on my Thrustmaster throttle, this is a drop in replacement. I printed with 4 walls and 25% infill, print in supplied orientation with supports for best results. You may need to file/sand down some of the…
Throttle cable retaining clip for Suzuki, part number 09403-05311 The model is based on accurate dimensions taken from the original clip and fits perfectly on a 1999 Suzuki Jimny. Designed as a direct replacement for broken or brittle…
Want to support further development of models and useful things for the home, feel free to show your support here: https://www.paypal.com/ncp/payment/7XH5TK4DDEQX4
This is a throttle tube designed for some mukini carbs on a 76 honda cb550. I printed this out of nylon carbon fiber 100% infill on a x1 carbon. It is used to replace the 2 cable system to a single cable system that the Mikuni carbs use.
This is an adapter plate for the Virpil CM3 for the nextlevelracing boeing military fight sim rig. It's intended to replace the bottom metal plate of the throttle with the existing screws. An alternate version that uses much less plastic…
A quick release plate to easily remove your throttle from your cockpit, for the Thrustmaster Warthog and Winwing Orion. For those like me who have a single sim rig for flightsim and simracing: Driving with a Throttle hitting your elbow…
The handle consists of two different parts held together by screws. It is designed to fit on a sheet metal control rod of 2.2 mm width (see image for an example). Handle length: 70 mm Diameter: 25 mm Height: 56.5 mm Required material: 1 x…
A quick release plate to easily remove your throttle from your cockpit, for the Thrustmaster TQS. For those like me who have a single sim rig for flightsim and simracing: Driving with a Throttle hitting your elbow sucks! So I…
The metal plate which normally takes care of fixing the throttle cables can crack in it's mounting point on the carburetor. This is very hard to repair, so this plate is an alternative mounting point for the two throttle cables. It mounts…
I wanted a simple throttle grip and the Mixture knob from Dingo was a perfect basis
Driving the E-scooter for long period may strain your thumb muscles. So I made this adapter to convert the thumb throttle to a motorcycle style throttle. I tried my best to get the tolerances correct but after printing you might need to…
Throttle Handle for Mercury Marine 110 7.5-9.8hp. Tested on 1977 Mercury 110. It will work on many other mercury outboards but is not tested yet. Replaces part: 77238A1
Tired of your throttle sticking? Use real bearing, either metal or polymer. With adjustable detent. Personally I fly helicopter so I skipped detent, but great to have the possibility. Re-upload of ADU-labs Thingiverse files . Such a great…
[Edit Aug 13 2023: Moved project files to Printables because Thingiverse can be . . . difficult to use sometimes.] [Edit Oct 25 2022: Still haven't had much of a chance to work on this project. Check out this remix for a more refined base…
This is a VPC MongoosT-50CM3 Throttle button mask to allow for easy customization/adjustment of button labels. I use my throttle quadrant for multiple different aircraft across multiple different flight and space simulator games, and find…
.2mm layer height, printed in PLA worked fine, extra walls is nice ~4 walls
I lost one of my Thurstmaster Airbus Throttle Selector and made this as replacement. Picture 2 shows the original left and the print right
Use with the @Vince_Prints_20779 CadetThrottle kit, print as with the knob.stl (use the knob from the kit for mixture, in red - this one for prop, in blue).
Paddle for certain mobility scooter throttles. think this was a pride? Designed these to fix my bosses old mobility scooter. hopefully this helps someone else. just mirror the model for the other side. had a tilt bar that was…
Throttle lever for a whipper snipper / weed whacker / line trimmer i have. Very basic design, however it works a treat. Sorry i have no details on the line trimmer i have. Its mixed makes as its very old
I purchased a cheap carburetor kit with cables from Amazon, for my Yamaha PW50. The cable was to short, and the rubber grommet was way to small, and would not snug fit into throttle hole. So I modeled up an adapter in Fusion 360, and made…
Bmw E30, E28 - throttle body nipple. OEM-number: 13 54 1 286 378 There are 2 same parts needded for assemble. Reproduced with the base dimensions of original part. You can find the best way to place this model on the printing table at the…
Not sure how long this will last but it does work! I have over 2,000 miles on it as of now. I have this installed on a LS1 BBK intake manifold and a BBK 85mm TB TPU 95A High temp Print Settings: 10 bottom layer 10 top layers 4 + walls…
I wanted to mount my joystick and throttle stick hanging upside down under a shelf to save some desk space, and I have found a nice way to achieve it using 3D printing, few screws and a bit of glue. All my tests went far better than…
Is it reffined? No. Does it work to replace 53141-958-000? Yes. Enjoy.
This is a throttle cable mounted rear view / fuel mirror mount for a paramotor. Modeled to fit the Air Conception Nitro throttle but will fit almost any cable. Designed to fit a 2" blind spot mirror commonly available, I used a "Ampper"…
This is a quick and easy mod to convert the Honda Motocompacto standard thumb-operated throttle into a twist-grip throttle just like a standard motorcycle! You will need some actual metal hardware: 2X 6706-2RS Ball Bearings (30x37x4mm) (I…
Odporúčam tlačiť PETG, kôli teplotám ktoré materiál vydrží…lepšie ako PLA.
This is designed to attach to a chair mount between my armrest and the throttle but you could attach it to any 4080 extruded aluminum structure or lay it flat on a desk. The holes between the detents can be used to store spare screws and…
I snapped my throttle lever while spraying one day. This was my first attempt at 3D Modelling something. A few revisions later and this is what i ended up with. I tried modelling it as close to factory as i could. A few minor tweaks to be…
These were hard to find a few years ago, so I modeled one myself and printed with PC Blend. Works well but I wouldn't print with PLA or PETG. These can be had for 15 or so bucks on eBay now but I thought I'd throw this here in case anyone…
It is made for the common DN 50 Tube System. You need a seal for the side where the tube comes in.
I had hood clearance issues and didn't like the price of metal low profile hats so I made my own. In my application its on a Fitech 2 barrel, but should fit any 4 barrel. Print in ABS or Nylon, I printed in Polymaker ABS and it works…
This is a made from scratch addon plate / mounting plate to fit a single Thrustmaster TCA Throttle to the official mount. This is for those like me who dont have the full size quadrint but have the single smaller tca throttle. Furthermore…
Inevitably the battery cover on your DT400/1/2 throttle will break. You may go insane trying everything from duct to electrical tape to keep the 9v battery contained. But eventually, that battery will simply fall out at the most…
The original design from @Vince_Prints is for sliding pots with just two holes. That's a detail I discovered AFTER printing. So I had to design an adapter for the four hole potentiometers out there. Here you can find the original desing…
im used to tinkercad, but thats not good enough for this project. So its taking me time to get used to this one. only started yesterday. xD dont know how the rest will go. but i have thrustmaster airbus, but the addons are quite…
throttle grip model for CBR 600 RR in the years 2003-2007 (I think). Model made in 3 different internal tolerances. From 22.6mm to 22.8mm. Measure your handlebar and match according to the print quality of your printer. The model was made…
I wanted one that looks like the one sold by Honeycomb but didn't see it for sale locally so I made this. It is printed in TPU and looks pretty good; adding a filled side like the silicon-molded version would have added a lot to the print…
If I had the wall space I would use bowerandy's Honeycomb Alpha/Bravo Wall Mount - but I don't. I need to put my throttle on the shelf, and while reading reviews I saw two people who complained that the trim wheel had broken off. Makes…
These models are simple plates with control cutouts which can be labeled and placed on top of your Virpil flight simulator controls. This allows you to quickly switch between labeling schemes for different aircraft and different flight…
Printed from PLA flexible material, 0.3mm thick. No, brim, 100% infill and of couse no support. Due to the flexible material and thin surface, it is worth carefully detaching it from the bed after printing. There may be a slight…
I bought the Roadless Gear thumb throttle kit to add onto my 1988 Suzuki Samurai, but wasn't thrilled with the included hardware to mount the throttle to the shifter - felt too loose and didn't clasp correctly (probably my error). I…
With this model you can quickly fix Thrustmaster TCA Throttle Quadrant to table and by lifting remove it. Mount holds it steadily in place when adding or retarding throttle. In my case it needs to be removed to use handbrake in other…
This accessory makes it easier to gas. Make the model bigger or smaller so it fits yours. Use PETG for better results. This is my Verison 2. Please add comments and tips.
Update 11/1/2020 - Added Arduino Sketch I wanted to add a more traditional switch panel and fake fuse panel to my Cadet Throttle. This is simply a remix to swap out the original pushbuttons for toggle switches, fake fuses and master…
Two simple drilling and cutting jigs to help you build your own Cadet Throttle. The full size jig sets all the dimensions for you but takes longer to print. The mini version can just be slid to your own guide marks if you prefer to save…
This is a (very close to) exact replica of the Stihl 4203 182 0801A Blower Throttle Thumb Lever, modeled by me in Fusion after taking measurements from the OEM part. Have not tried the printed version yet to see how well it works. Some…
Thanks to my clip, you can release the throttle lever, and the lawn mower won’t shut off. You won’t need to restart the mower repeatedly anymore. I’ve always felt the inconvenience of constantly holding and squeezing the throttle lever on…
I am not the first to do this but figured I'd share anyway. I really wanted a slap switch for my WW Viper throttle so I got this cheap button from Amazon and printed some parts. I didn't bother with their software because it emits '2' by…
Attach these printed parts first to the devices using the original screws. You'll remove two screws from the joystick bottom side (should be obvious which ones) and screw them back in through the body of the adapter. The throttle body…
This is to mount your Honeycomb Bravo Throttle under your desk with original clamps that come with the bravo quadrant.
Für alle, die ohne Schuhwerk unterwegs sind und ein wenig mehr Auflagefläche für Ihren Fuß benötigen. For all those who are out and about without shoes and need a little more support for their feet. Gedruckt auf Prusa Mk4 Material PC…
After trying to make a casting mould of my original throttle with silicone glue (and destroying it due to the solvents) I had a small issue with my ABS filament and the original part broke when I installed. Because of the pandemic, I…
Ergonomic grip clamp for most motorcycles, can be clamped into place with a ziptie. Printed in PETG. no supports. 50%-80% infill
Hello, My fuel pump gas throttle plastic part broke on my 1990 Volvo 740 Diesel so I have designed a new one, cause I needed to drive the next day. First 2 versions broke, so these 2 are the result of testing, failing and learning.…
Remixed throttle pedal extension for NA and NB Miata MX5s. It now uses M4 nuts instead of heat set inserts. I highly recommend using Nyloc nuts for this. Countersunk M4 screws fit nicely in the pedal without protruding into your foot.…
Just added a curve to a smaller diameter so the first bit of throttle engagement isn't so harsh
My xiaomi electric scooter worn out the acceleration grip. I wanted to print a quick replacement in TPU and as I couldn't find any I created one myself. I hope this is useful for everyone. Please, consider to give a like or publish a make…
This is a Throttle Body remix for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (9) 1 x UpperIntakeManifoldExtension: Layer:0.15mm Raft:no Support:no Infill:100% 1 x…
As i needed a new throttle quadrant i took this brilliant design and scaled it down to 87% as i needed it a little smaller. Additionally i changed the design a little according to following of my rules: - Simplification - Print more and…
This simple model will allow a Virpil Prime throttle to be mounted to 8040 profile in a sim rig. It requires: 4 - M5 x 12mm countersunk screws (for attaching the prime to the model) 3 - M8 bolts or M8 adjustable clamping levers 3 - M8…
Works great on my line trimmer. Original snapped and i couldnt get parts so whipped this up real quick. Its a bit chunky without the sexy curves but it works and that all i needed.
Replace the original “house” with this one, and you will eliminate the 50% throttle stop as well as increasing the throttle friction. The friction is increased by having a more compressed spring due to the “shorter” inside. The 50% stop…
The Aluminum throttle mount that came with my boat, was too wide for my Bimini Top poles, pic 4. I designed a mount that was an exact fit for my SeaStar / Teleflex CH2600 & CH2700, it provides more space along the rail and also fits…
Design uses a potentiometer. Designed for 22 mm handle bar. u can use rubber band or max 6 mm diameter spring. Source file included so you can edit for your own needs.
you need a 3d printer an it need to be printet with support structure
This is designed for a LHD 1991 Volvo 240, but it may fit other years and possibly RHD as well. This simply bolts in place of the bushing/mount where the throttle cable bolts to the firewall when moving to a DBW or e-throttle system. I…
Don't forget to like and comment. Remix of this excellent work by Vince_Prints and 4689rich. https://www.thingiverse.com/thing:4655661 https://www.thingiverse.com/thing:4655608 https://www.thingiverse.com/thing:4681559…
Do you want to palm your VKB throttle ? Do you already have more joystick axis than you know what to do with? Dedicate your whole hand to this lever head. My print is PETG, and holds the square nuts in place. If you want to try PLA, give…
infill:30-100 supports: yes brim: optional walls: 2-4
Throttle file was tested to work while printed at 0.3 layer height Additional Throttle lock was tested to work and fit printed at 0.1 layer height
e-bike throttle modification kit These files should help you modify your twist throttle to thumb style. My motivation was to convert it so I can use classic bicycle grips on my folding e-bike without need to spend money on different…
My changes refer to https://www.thingiverse.com/thing:5585771 - I use and HatSwitch to Coms 1_Alt_hatswitcih -Add collar to lock well the Shell shell 3_collar_ManRNGUncage-Knob - Rebuil tha BASE and the cover in 5 Panels, easy to print…
I designed these to be inverted or not. They are designed to be used with these shakers - https://www.amazon.com/dp/B08. Hardware used: M10x30 and nut minimum to mount bracket to each pedal. M5x8 flat countersunk head to mount shaker to…
My friend went from cable throttle to DBW and forgot to get a block off plate for where the cable came through the firewall, so a few measurements later I made this! Confirmed fitment on R34, but should fit R32 and 33, as well as S13, 14,…
Had to remake it from scratch in Fusion 360 as it was much more comfortable than modifying the existing model, i include the .f3d for whoever wants to change it. I wont lie, i tested it breafly and it does indeed work, although the notch…
Based on jtpeyton Digitrax Throttle Dimensions. I needed to change the bottom to allow access to the Loconet Cable port (because I use a tethered system), and the lanyard attachment to fit in the holder for the Digitrax DT600 throttle. It…
Para montarlo debe colocarlo en el acelerador y colocarle un cincho plastico de asegurar
This design adjusts the angle of the throttle quadrant 30 degrees to a more comfortable flatter angle. I designed it to match the angle of the throttles seen on airliners and other aircraft. For easier storage it is printed in multiple…
Ever wanted to use realistically modelled PA-28 controls for your Honeycomb Bravo Throttle Quadrant? Or maybe you want well made controls with larger and more comfortable knobs than the stock GA ones? Perhaps you often fly in VR and find…
