1 / 1
BMW F10 3 Series GT Throttle Body Gear
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an internal gear within the throttle body of the BMW 3 Series GT, which is a common failure point.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 246
- Makes
- 0
- Views
- 1,100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
One of the main failure points of a BMW 3 Series GT is the throttle body, specifically the nylon gear within the throttle body that can break off causing the throttle flap to be in a stuck open or non functional position. This gear can be used a temporary repair solution to the problem.
Print Settings/Notes
- Tested with PLA - working fine since the last 500kms. HOWEVER, this is not the solution!
- Must use Nylon or some other high temperature, high strength material if you intend to keep it within the car