Helmer Drawer Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA Helmer Alternative Handle
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 63
- Wydruki
- 2
- Wyświetlenia
- 954
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I wasn't impressed by the original handles of the IKEA HELMER drawer element, so I decided to make one that will fit more with my office aesthetic, being black and angular, instead the original silver.
Use the Fusion 360 file for remixing, the design is quite simple and you can make whichever form you like. You can print all the handles in different colors and make a unique looking HELMER.
Since it is something that will not be dismantled often (if at all) I decided to tap the screw holes. The original IKEA screws are M4 and I reused them by tapping the holes of the model with equivalent tapping tool. You can adjust the model if you want to have threaded inserts or bigger/smaller screws.
Printed on PETG with the following slicing parameters:
Nozzle: 0.6
Infill: 20% Rectalinear
Perimeters: 3
(Alternatively you can use ironing if you feel it's needed)