1 / 5
Low action saddle and bridge for Kala Waterman Ukulele — zdjęcie 1
1 / 5

Low action saddle and bridge for Kala Waterman Ukulele

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement saddle for a Kala Waterman ukulele. This ukulele apparently has a very high action. This saddle is…

Ocena
0 / 5
Polubienia
5
Pobrania
41
Wydruki
0
Wyświetlenia
356
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A replacement saddle for a Kala Waterman ukulele. This ukulele apparently has a very high action. This saddle is around half the thickness of the original, and drops the strings by around 3.5mm. Print it so that the saddle is printed vertically (like a tower), otherwise all the little lugs will snap off. Use a hard plastic, like PLA so the strings don't wear through the plastic.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

Lots

Notes:

Print it vertically, like a tower, using a hard plastic.

Category: Music

Tagi