BASE STAND MOUNT M8 FOR LIGHTING OR CAMERA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BASE STAND FOR ONE SCREW MOUNTING 200x200 PRINT BED SIZE
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When used for M8 nut/screw native scale is made for 200x200 printbed (diagonally)
For M5 M6 nut/screw calculate scale down ratio
Minimum or none support necessary as usual, skirt improves printbed adhesion, on 0.8 or thicker nozzle diameter one wall pass is just fine depending on your print quality
Circular part that is sticking out the top is supposed to fit the hole of the part that is to be mounted. It is around 16mm in diameter.
The groove is for optional oring 20x2.5 that makes spinning harder
Made this for my lamp, larger, rounded and overall later stand model is posted separately (M6)
Toggle nut/screw holders M8 model:
https://www.printables.com/model/228506-wheel-screw-nut-holder-60mm-for-m8-hex-screw-bolt-
SHARE LIKE COMMENT TIP - POST A MAKE
My other designs
https://www.thingiverse.com/thesloppyapprentice/designs
https://www.printables.com/social/296116-the-sloppy-apprentice/models
Take a look at my youtube channel: