Lego Technic compatible X-shaped peg connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The peg has a small round to the ends and pull notches for fingertips like the original.
- Ocena
- 4,5 / 5
- Polubienia
- 18
- Pobrania
- 84
- Wydruki
- 2
- Wyświetlenia
- 713
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
My kid broke one of ours, and we didn’t have a spare.
It should be a tight-ish fit. They’re not supposed to fall out. The peg has a small round to the ends to help get it started in the hole.
Print on its side and rotate 45 degrees to look like an ‘X’ end-on. It should not look like a ‘plus sign’ in the slicer from the side.
You’ll need a brim (I used 3mm). I tested it with a few Lego parts and had no problems. The color of Ataraxia “ETG in “Red (Pantone” 1795c)” is spot-on for the Lego red pegs. It was printed on Prusa Mini+ in 4 minutes with no issues.