Lego Technic compatible X-shaped peg connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The peg has a small round to the ends and pull notches for fingertips like the original.
- Rating
- 4.5 / 5
- Likes
- 18
- Downloads
- 84
- Makes
- 2
- Views
- 713
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution
My kid broke one of ours, and we didn’t have a spare.
It should be a tight-ish fit. They’re not supposed to fall out. The peg has a small round to the ends to help get it started in the hole.
Print on its side and rotate 45 degrees to look like an ‘X’ end-on. It should not look like a ‘plus sign’ in the slicer from the side.
You’ll need a brim (I used 3mm). I tested it with a few Lego parts and had no problems. The color of Ataraxia “ETG in “Red (Pantone” 1795c)” is spot-on for the Lego red pegs. It was printed on Prusa Mini+ in 4 minutes with no issues.