Cable strain for Precise Printer Parts Cast Aluminum Bed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a cable strain for my silicone heater on my Precise Printer Parts machined bed. This may work on the other beds…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 410
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed a cable strain for my silicone heater on my Precise Printer Parts machined bed. This may work on the other beds they sell but I only have an Ender 3 and that model specific bed plate from them. I printed it in PLA to finalize the design and had it printed in ABS and also Nylon through a service (The black one in the pictures is Nylon).
https://preciseprinterparts.com/ender-3--cast-aluminum-bed.html
(They claim to have a flatness less than 0.1mm (0.004in), they check each bed to make sure it does not exceed 0.15mm (0.005))
My silicone bed heater is from Gulf Coast Robotics.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
31%
Filament: Overture Silk PLA Silver
Category: 3D Printer Accessories