1 / 1
Boat cover clip - Boston Whaler - 1981 Montauk
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a clip for my boat cover. Here it is. I wouldn't recommend it for covers used while driving.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a clip to hold down the boat cover for a 1981 Boston Whaler Montauk. The Whaler has an unusual hull and rub rails so a special shape is required. Here it is. It might work for other boats but hasn't been tested in any.
- Probably not tough enough to hold the cover on while towing. If you try it let us know. Using large numbers of clips might help. If you try 75 of them let us know.
- In hot climates use plastic that can withstand the heat. In California I have to use PETG or better.
- Not tested in high winds (yet) or with lots of water or snow on the cover. I put something tall in the boat to lift the cover to a point so the water rolls off when it rains.
- No supports or raft required
- Used 0.2 height but any height should work fine.