BangGOD - DJI O3 & O2 FPV Camera Soft Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a soft mount to be printed in TPU to mount the DJI O3 Air Unit Camera to a BangGOD Frame
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 891
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a soft mount to be printed in TPU to mount the DJI O3 Air Unit Camera to a BangGOD Frame. It is lightweight at less than 1 gram. The mount is secured with tension (no screws required). You can slide the camera forward and back to minimize propellers in view or backward to maximize camera protection. The Camera can be rotated directly forward and uptilt to as much as 45 degrees.
Print 2 copies of the model (one mirrored) and set it to 20% infill using TPU. Print with the main flat area facing down onto your build plate. No supports are required. Use the included DJI screws to mount all four screws to each plate. Rotate the camera within the TPU printed plate as desired and enjoy.