1 / 1
Voron 2.4r1 Oehlbach Anti Vibration Feet — zdjęcie 1

Voron 2.4r1 Oehlbach Anti Vibration Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flat replacement feet for the original Voron 2.4r1 Combine with OEHLBACH Shock Absorber (55038) for vibration dampening

Ocena
0 / 5
Polubienia
13
Pobrania
21
Wydruki
0
Wyświetlenia
1036
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

These are some flat replacement feet for the original Voron 2.4r1.
I didn't convert mine fully to r2 yet, so it's still with the original r1 baseplate.

The edges are slightly rounded to match the orignal baseplate.
Carefull not to tighten the screw too hard, since it might rub on the 80T gear.

Print in 2x A and B and slip in the OEHLBACH absorbers.
Theres a small lip on the edge of the rim so the absorbers won't fall out.

Buy these: https://www.amazon.de/gp/product/B00CEY9PWY/

Tagi