1 / 3
Shop vacuum hose connectors (40 and 41 mm) — zdjęcie 1
1 / 3

Shop vacuum hose connectors (40 and 41 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Some simple screw adapters for connecting vacuum hoses with 40 mm and 41 mm OD in the workshop.

Ocena
4,833 / 5
Polubienia
87
Pobrania
556
Wydruki
6
Wyświetlenia
1997
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Shop vacuum hose connectors

The vacuum cleaner in my little workshop is located stationary in one corner of the workshop. To reach the other side of the workshop, I use several hoses from old vacuum cleaners that are connected to each other. Most of these are recycled from old, defective vacuum cleaners 😊

Vacuum cleaner hoses with 40 and 41 mm OD seem to be a standard size in Europe.


STL files

The STL files are labeled according to the diameters in mm:

  • VacuumHoseCoupler-H40-H40.stl connects a Hose with 40 mm OD to another Hose with 40 mm OD
  • VacuumHoseCoupler-H40-H41.stl connects a Hose with 40 mm OD to a Hose with 41 mm OD
  • VacuumHoseCoupler-H41-H41.stl ... you get the idea ;-)

Printing

Nothing special here. I printed most of these in PLA with 0.3 mm layer height, low infill (about 10%) and they work fine.

Sources

This is inspired by a FreeCAD tutorial by Youtuber cremofix.
 

Tagi