Shop vacuum hose connectors (40 and 41 mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some simple screw adapters for connecting vacuum hoses with 40 mm and 41 mm OD in the workshop.
- Rating
- 4.833 / 5
- Likes
- 87
- Downloads
- 556
- Makes
- 6
- Views
- 1,997
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Shop vacuum hose connectors
The vacuum cleaner in my little workshop is located stationary in one corner of the workshop. To reach the other side of the workshop, I use several hoses from old vacuum cleaners that are connected to each other. Most of these are recycled from old, defective vacuum cleaners 😊
Vacuum cleaner hoses with 40 and 41 mm OD seem to be a standard size in Europe.
STL files
The STL files are labeled according to the diameters in mm:
VacuumHoseCoupler-H40-H40.stlconnects a Hose with 40 mm OD to another Hose with 40 mm ODVacuumHoseCoupler-H40-H41.stlconnects a Hose with 40 mm OD to a Hose with 41 mm ODVacuumHoseCoupler-H41-H41.stl... you get the idea ;-)
Printing
Nothing special here. I printed most of these in PLA with 0.3 mm layer height, low infill (about 10%) and they work fine.
Sources
This is inspired by a FreeCAD tutorial by Youtuber cremofix.