Triple Exhaust Outlet With Plate Valves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of my own design. This print allows you to connect 3 printers to one exhaust outlet (wall mounted). I…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
See https://www.printables.com/model/356611-double-exhaust-fitting-wall-mount-with-valves for original design
This is a remix of my own design. This print allows you to connect 3 printers to one exhaust outlet (wall mounted). I use a typical dryer vent exhaust. You need 2.5" ID x 3" OD duct similar to McMaster-Carr p/n: 5666K16 to attach to the threaded ends of this exhaust wall mount.
Each valve is actuated by pushing down to close or pulling up to open and can be open or closed independently of each other.
Print in PLA, PETG or ABS (print Seal in TPU see original design)
See original design for the valve, cover and seal STL files and for more information.
Category: 3D Printer Accessories