Leg Mounted Storage Shelf for Tripod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a shelf I use for holding my receiver and/or related video components on my ground station for FPV, although…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a shelf I use for holding my receiver and/or related video components on my ground station for FPV, although it could be used for anything. It is designed specifically for a Sony Tripod but I would imagine it would fit many different brands.
The design requires a 5mm heat set nut, and 5mm thumbscrew for tightening the shelf onto the tripod leg.
This shelf is very strong and the design is such that the more weight you put on it the more it resists sliding down the leg of the tripod, especially if the weight is kept towards the outer end of the shelf.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
50%
Post-Printing
Add a 5mm heat set nut and then a 5mm thumbscrew about 25 to 35mm long.
Category: R/C Vehicles