Baghandle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had a bag where the original handle made of fabric snapped. Printed a new one.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Handle was printed with 4 walls, 4 bottoms and 4 top and with 15% gyroid infill
Pin was printed on its longest side with 9 walls, 9 bottoms and 9 top without infill
Connectorplate was printed with 6 walls, 6 bottom, 6 top and with 15% gyroid infill
Printed on an Ender 5 pro with borosilicate glassplate, a 0.6mm nozzle,
215 on the nozzle and 70 on the plate, after the first layer the bed goes to 55
Took about 7 hours and 30 minutes to print everything.
Handle took 2h37m for 1, need 2
Pin took 47m for 4
Connectorplate took 1h27m for 4
Glued everything with 2 part epoxyresin