Baghandle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Had a bag where the original handle made of fabric snapped. Printed a new one.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Handle was printed with 4 walls, 4 bottoms and 4 top and with 15% gyroid infill
Pin was printed on its longest side with 9 walls, 9 bottoms and 9 top without infill
Connectorplate was printed with 6 walls, 6 bottom, 6 top and with 15% gyroid infill
Printed on an Ender 5 pro with borosilicate glassplate, a 0.6mm nozzle,
215 on the nozzle and 70 on the plate, after the first layer the bed goes to 55
Took about 7 hours and 30 minutes to print everything.
Handle took 2h37m for 1, need 2
Pin took 47m for 4
Connectorplate took 1h27m for 4
Glued everything with 2 part epoxyresin