1 / 6
Turnigy 9X Monitor Support
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified version of the Monitor Support by Straub for the Turnigy 9X.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A modified version of the Monitor Support by Straub for the Turnigy 9X.
I have an Eachine LCD5802D Monitor but it should also work with other ones.
You'll need a M5 x 50 bolt and an M5 nut and you can get a grip for the bolt from the original support (http://www.thingiverse.com/thing:1888552) to tighten and loosen it by hand.
Print instructions
Print Settings
Printer Brand: Ultimaker
Printer: Ultimaker 2
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 30%
Notes:
Print on the side. PLA should be enough for its purpose.
