Thumper's Aftermarket Shop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an assortment of optional parts for Thumper a 1:8 Scale Rock Crawler
- Ocena
- 5 / 5
- Polubienia
- 199
- Pobrania
- 1426
- Wydruki
- 3
- Wyświetlenia
- 7242
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
Optional parts for Thumper (Click on files to see visual 3D files)
Narrow wheels fit trailers. Wide wheels technically fit. beware of oversizing.
STL files have a Prefix letter. All parts for each set are marked with the same prefix letter.
Example: If you wanted the Hood with breather you need all STL files that begin with an A
A- Hood with breather passing through hood
B- Hood with Breather and hood scoop
AorB- Use with A or B hoods
E- Bass front bumper without winch mount
F- Bass front bumper with winch mount
H- Adjustable (0 to -1mm gear mesh) Heavy Duty axle centers (Thumper Front- Morrigan Front and Rear) Add 18mm screws and nuts to keep from splitting.
I- Adjustable (0 to -1mm gear mesh) Heavy Duty axle centers (Thumper Rear NOT rear steer) Add 18mm screws and nuts to keep from splitting.
J- Tie Rod additional length options (As marked)
K- MotorPlate3536
L- MotorPlate3548 ( You will have to find a new place for your ESC)
N- Differential Guard
O- New Sporty Seat
P- Steel Wheel Set
Q- Steel Wheel set with visible Locker
R- Alloy Wheel set
S- Alloy Wheel set with visible Locker - March 15th 2023 - fixed narrow outer wheel
Y- Four belt gears
Z- Two belt gears
AA- Heavy Duty axles for Thumper - front and rear steer- Optional Spindles with and without 3x6x2.5 pivot bearings.
AB- Tire Carrier - Replaces License Plate- by Brandon
AC- Tire Carrier Skeletonized - Replaces License Plate- by Brandon
AD- YJ Conversion (hood, grill, bumper, lights)
AE- Fenders Sharper look
AF- Tire mount for printed wheels
__________________________________________________________________________________________________________________
Transmission gear rules: There are two gear
Each belt is a gear set. A gear set must have a total of 51- teeth for proper belt tension.
Example: A 22T tooth gear must match with a 29T tooth gear- total =51
A 18T must pair with a 33T =51
__________________________________________________________________________________________________________________