1 / 10
Container with screw cap made from empty reflow spools (reuse idea)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got inspired by this model to create my own design for turning empty reflow spools into useful containers.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 775
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (23)Powiązane
I got inspired by this model to create my own design for turning empty reflow spools into useful containers.
The whole thing consists of 3 parts, more about the assembly can be found below.
Here are a few specifications:
- easy opening/closing of the box
- thin parts: very little material needed
- easy and fast printing with filament rests
- modern design: fits perfect in every room
How to assemble it:
- cut off the side parts of the reflow spool and remove glue and cardboard scraps
- press the bottom part tight in the core
- glue in the upper part with the thread (hot glue is perfect)
- fill your new container and screw the lid on
- Have fun and share your print with us!
I am currently working on a second version to make the lock a bit simpler and to increase the material usage. Please feel free to share your improvements and remixes!
happy printing and reusing! ;)
Print instructions
- 0,4mm nozzle
- 0,2mm layer height
- no supports
- 20% infill
- brim is recommended for the main part with the thread
- rPETG from Reflow is fantastic for it