K50 Laser honeycomb fixing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixing of the honeycomb of the K50 laser to the working table
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The honeycomb of my K50 laser is not fixed. If I accidently push it accidently accidentally, the position for the next job does not fit anymore.
I made some mounting frames to fixing the honeycomb.
Design is easy:
The mounting frames in the back and on both sides are juts screwed with 2 x M6 screws to the working table and slottet holes allows the positioning of the honeycomb.
For the front this solution does not fit and I added a M6 nut for a set screw to press against the honeycomb.
For all the mounting frames I made some drill jigs to be sure that they will fit.