K50 Laser honeycomb fixing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fixing of the honeycomb of the K50 laser to the working table
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 548
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The honeycomb of my K50 laser is not fixed. If I accidently push it accidently accidentally, the position for the next job does not fit anymore.
I made some mounting frames to fixing the honeycomb.
Design is easy:
The mounting frames in the back and on both sides are juts screwed with 2 x M6 screws to the working table and slottet holes allows the positioning of the honeycomb.
For the front this solution does not fit and I added a M6 nut for a set screw to press against the honeycomb.
For all the mounting frames I made some drill jigs to be sure that they will fit.