1 / 2
LowRider 3 Reinforced Front Y Belt Holder | Fix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stronger y belt holder, which doesn't break so easily.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 226
- Wydruki
- 3
- Wyświetlenia
- 834
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (28)Powiązane
If you have the problem with the front y belt mounts that they cannot withstand the pull of the belt and the upper part pushes out of the lower part, try this one-piece mount.
The size of the holes are the same.
If you now have the problem that the belt disappears through the slot, use a piece of a nail and put it in the loop of the belt so that it can no longer go through the slot.