Mosaic Palette 3 Wall Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall bracket to mount your Mosaic Palette 3 (or Pro) to the wall.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 584
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed to allow full insertion of the bracket upside down with the corner cutout (the P3 has some internal steel bracketing that doesn't allow the normal stand profile to insert fully), and a small standoff supporting below the bracket so the Palette doesn't appear to sag. Designed for #12 screws, #14 fit.
Needs no brim, printing with the shallow angle down and the long axis aligned with Y.
I printed with 0.8 nozzle, 0.4 layers, 0.3 Elephant foot compensation, Filaments.ca PLA PRO.
Shown using RepRack filament system for feeding.
v1.1 has some incremental changes to pull the P3 closer to the wall and adds a positive stop to the bracket so that it doesn't “wiggle” on the mount. Very solid now.