Mosaic Palette 3 Wall Mounting Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall bracket to mount your Mosaic Palette 3 (or Pro) to the wall.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 104
- Makes
- 0
- Views
- 584
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Designed to allow full insertion of the bracket upside down with the corner cutout (the P3 has some internal steel bracketing that doesn't allow the normal stand profile to insert fully), and a small standoff supporting below the bracket so the Palette doesn't appear to sag. Designed for #12 screws, #14 fit.
Needs no brim, printing with the shallow angle down and the long axis aligned with Y.
I printed with 0.8 nozzle, 0.4 layers, 0.3 Elephant foot compensation, Filaments.ca PLA PRO.
Shown using RepRack filament system for feeding.
v1.1 has some incremental changes to pull the P3 closer to the wall and adds a positive stop to the bracket so that it doesn't “wiggle” on the mount. Very solid now.