Fruit Bowl "Sandy Melon"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,43 € – 0,53 € netto (bez VAT)
Dla pliku: plank_0.6n_0.4mm_PLA_MINI_20m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,48 € netto (środek widełek).
- Masa podana przez autora
- 9 g
- Czas druku podany przez autora
- 20,4 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Fruit bowl in modern design. Can hold several kilograms of fruit.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 702
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This fruit bowl comes in a modern design. The "Sandy Melon" is quite large and can easily hold several kilograms of fruit.
It is easy to print and easy to assemble. No screws, no glue required.
Why "Sandy"?
To give the fruit bowl more weight, I have added a print pause during which you can add sand (salt or sugar) to the base. Use whatever you have available.
Sand is best because it is heavier than salt or sugar. The base holds about 660g of sand or 550g of salt or 440g of sugar.
Why "Melon"?
I have created three different sized fruit bowls. "Sandy melon" is the largest variety. There is also "Salty Apple" (medium size) and “Sweet Lemon” (the smallest).
Check out all of them in this collection.
Printing information
- Planks (30 pieces required)
- Layer height: 0.40mm (with 0.6mm nozzle), 0.20 (with 0.4mm nozzle)
- Infill: Support Cubic 20%
- Brim: recommended
- Support: no
- Base
- Layer height: 0.40mm (with 0.6mm nozzle), 0.20 (with 0.4mm nozzle)
- Infill
- Start with Gyroid 5%
- Layer Range 15.00 - 15.80: Grid 25%
- Layer Range 39.40 - 53.00: Grid 15%
- Brim: no
- Support: no
- Print pause: 39.40
As described above, you can add material to the base during the break to increase its weight. Fill the material very carefully and not all the way to the top. Otherwise the printer fan will start a sandstorm as soon as you continue printing ;-)
- Layer height: 0.40mm (with 0.6mm nozzle), 0.20 (with 0.4mm nozzle)
Use Height Range Modifier in Prusa Slicer to define the above layer ranges. For description see Prusa 3D Help.
These infill variations save time and material. If you do not want to set them, use Grid 25% throughout.
Assembly
Simply insert the planks into the recesses provided in the base. Make sure you insert the right side. This is the one with the slightly larger distance to the ring hole.
If you like the rings, just use some filament for them.
I am looking forward to your Makes! :-)
The following filament was used in the pictures above:
- Extrudr PLA NX2 anthrazit
- Extrudr PLA NX2 white
If you like this model, feel free to check out my others here.
And maybe you would like to support me with a small donation. Feel free to use the support button on the top right of this page. I myself donate one or two Euros to each designer for an interesting model that is worth five stars to me.