Fruit Bowl "Sandy Melon"
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.43 – €0.53 net (excluding VAT)
For file: plank_0.6n_0.4mm_PLA_MINI_20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.48 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 20.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fruit bowl in modern design. Can hold several kilograms of fruit.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 66
- Makes
- 0
- Views
- 702
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This fruit bowl comes in a modern design. The "Sandy Melon" is quite large and can easily hold several kilograms of fruit.
It is easy to print and easy to assemble. No screws, no glue required.
Why "Sandy"?
To give the fruit bowl more weight, I have added a print pause during which you can add sand (salt or sugar) to the base. Use whatever you have available.
Sand is best because it is heavier than salt or sugar. The base holds about 660g of sand or 550g of salt or 440g of sugar.
Why "Melon"?
I have created three different sized fruit bowls. "Sandy melon" is the largest variety. There is also "Salty Apple" (medium size) and “Sweet Lemon” (the smallest).
Check out all of them in this collection.
Printing information
- Planks (30 pieces required)
- Layer height: 0.40mm (with 0.6mm nozzle), 0.20 (with 0.4mm nozzle)
- Infill: Support Cubic 20%
- Brim: recommended
- Support: no
- Base
- Layer height: 0.40mm (with 0.6mm nozzle), 0.20 (with 0.4mm nozzle)
- Infill
- Start with Gyroid 5%
- Layer Range 15.00 - 15.80: Grid 25%
- Layer Range 39.40 - 53.00: Grid 15%
- Brim: no
- Support: no
- Print pause: 39.40
As described above, you can add material to the base during the break to increase its weight. Fill the material very carefully and not all the way to the top. Otherwise the printer fan will start a sandstorm as soon as you continue printing ;-)
- Layer height: 0.40mm (with 0.6mm nozzle), 0.20 (with 0.4mm nozzle)
Use Height Range Modifier in Prusa Slicer to define the above layer ranges. For description see Prusa 3D Help.
These infill variations save time and material. If you do not want to set them, use Grid 25% throughout.
Assembly
Simply insert the planks into the recesses provided in the base. Make sure you insert the right side. This is the one with the slightly larger distance to the ring hole.
If you like the rings, just use some filament for them.
I am looking forward to your Makes! :-)
The following filament was used in the pictures above:
- Extrudr PLA NX2 anthrazit
- Extrudr PLA NX2 white
If you like this model, feel free to check out my others here.
And maybe you would like to support me with a small donation. Feel free to use the support button on the top right of this page. I myself donate one or two Euros to each designer for an interesting model that is worth five stars to me.