Minimalistic HexScraper – Compact Print-Bed Scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact PLA print-bed scraper with multiple scraping edges and a honeycomb design. No supports or assembly needed.
- Ocena
- 4,862 / 5
- Polubienia
- 173
- Pobrania
- 1021
- Wydruki
- 34
- Wyświetlenia
- 2970
- Oceny
- 29
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Clean bed. Fresh start.
The Minimalistic HexScraper is a compact, one-piece scraper for removing filament remnants from your 3D printer’s build plate. A central grip keeps the tool close to your hand, while the hexagonal shape provides several scraping edges to choose from.
Why print it?
Multiple scraping edges: rotate the tool to choose another edge.
Compact grip: guide the scraper directly across the build plate.
Honeycomb design: open geometry with a distinctive hexagonal look.
Simple print: one piece, no supports and no assembly.
Print settings
Material | PLA |
|---|---|
Layer height | 0.15 mm |
Infill | 100% |
Perimeters | At least 4 |
Supports | None |
These are the original recommended settings. The supplied MK3S print file takes about 1 hour 22 minutes and uses approximately 10 g of PLA; results vary with your printer and slicer settings.
Files included
Minimalistic Hex Scraper.3mf — model to slice for your own printer.
MinimalisticHexScraper_0.15mm_PLA_MK3S_1h22m.gcode — prepared print file for the listed Prusa MK3/S/S+ setup with a 0.4 mm nozzle.
How to use it
Let the build plate cool, hold the central grip and gently slide a suitable edge towards the filament remnants. Use light pressure and follow your build-plate manufacturer’s care instructions.
Show your Make
Which colour belongs next to your printer? Share a Make and tell me which edge works best for your everyday cleanup. Your feedback helps shape future improvements.